Order Products : sales@su-jiao.com

Mirakutoran® TPU H885FNAT

Category:	TPU Alloy , Thermoplastic Polyurethane Elastomer Alloy
Manufacturer:	Japan Mirakutoran Inc.
Trademark:	Mirakutoran® TPU
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hfp10d_Mirakutoran-TPU-H885FNAT.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Our TPU "Mirakutoran ®" has the following outstanding features.

Has excellent wear resistance

Tensile strength, high mechanical strength and tear strength

Is a wide range of hardness

High impact strength

Oil resistance and good chemical resistance

Excellent low temperature properties, weather resistance, ozone resistance and is also good

Flexible rubber elastic, vibration-effective silencing

Compared to other urethane elastomer thermoplastic that is more

Playback can be processed

Vulcanization process without curing reaction, very high productivity

Resins and other polymer is easy

Solution is easily dissolved in solvent process

Mirakutoran to the standard type E and P are two types.

Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure

General Information
Features	Low compressive deformability Shock absorption Impact resistance, good Good strength Good flexibility Good tear strength Ozone resistance Low temperature resistance Good chemical resistance Good wear resistance Good weather resistance Heat resistance, high Oil resistance

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.19	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 23°C, 2.00mm, injection molding)	83 - 87		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% strain, 23°C, 2.00mm)	6.90	MPa	ASTM D412
Tensile Strength ²(Yield, 23°C, 2.00 mm)	38.0	MPa	ASTM D412
Tensile Elongation ³(Break, 23°C, 2.00 mm)	550	%	ASTM D412
Tear Strength ⁴(23°C, 2.00 mm)	98.0	kN/m	ASTM D624
Compression Set (70°C, 22 hr)	21	%	ASTM D395

Additional Information
Test Methods: JIS K7311, K6262, K7206

Note Message
1 .	300 mm/min
2 .	300 mm/min
3 .	300 mm/min
4 .	300 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 600 TFE 20	RTP Company	ABS	RTP
RTP 300 LF L UV	RTP Company	PC	RTP
Multilon® T-2830R	TEIJIN LIMITED	PC+ABS	Multilon®
COBIFOAM 0	M&G Gruppo Mossi & Ghisolfi	PET	COBIFOAM
Infino HM-1152	LOTTE ADVANCED MATERIALS CO., LTD.	PC+ABS	Infino