Order Products : sales@su-jiao.com
HIVAL® 5303
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Nexeo Solutions, LLC. |
| Trademark: | HIVAL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hfGX1K_HIVAL-5303.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HIVAL®5303 is a high impact polystyrene material,. This product is available in North America and is processed by extrusion or injection molding. HIVAL®The main features of the 5303 are:
HIVAL®Typical application areas of 5303 are: food contact applications |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1930 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 27.6 | MPa | ASTM D638 |
| Flexural Modulus | 1930 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 160 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.6 | °C | ASTM D648 |
| Vicat Softening Temperature | 93.3 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 199 - 232 | °C | |
| Middle Temperature | 204 - 232 | °C | |
| Front Temperature | 218 - 260 | °C | |
| Nozzle Temperature | 218 - 260 | °C | |
| Processing (Melt) Temp | 218 - 274 | °C |
| Injection instructions |
|---|
| Screw Speed: SlowInjection Speed: Slow - Fast |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 193 - 227 | °C | |
| Cylinder Zone 3 Temp. | 199 - 232 | °C | |
| Cylinder Zone 5 Temp. | 204 - 243 | °C | |
| Die Temperature | 210 - 232 | °C |
| Extrusion instructions |
|---|
| Screw L/D: 20:01Compression Ratio: 2:1-3:1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 66 A53^EM | Polykemi AB | Nylon 66 | SCANAMID 66 |
| TAROPRENE® 2 A65 E1G | Taro Plast S.p.A. | TPV | TAROPRENE® |
| YUPLENE® B310F | SK Global Chemical | PP Impact Copolymer | YUPLENE® |
| ADDINYL A2 ZV15 | ADDIPLAST | Nylon 66 | ADDINYL |
| HiFill® PA6/6 GF/M40 HS L NAT | Techmer Engineered Solutions | Nylon 66 | HiFill® |
