Order Products : sales@su-jiao.com
Dryflex® CS 60A001N
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hYOgwq_Dryflex-CS-60A001N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dryflex CS are a range of thermoplastic elastomer (TPE) compounds, based on SEBS. The range has been engineered to deliver optimised compression set performance. The raw materials used to manufacture Dryflex CS compounds are compliant with food contact regulations. The compounds also offer excellent organoleptic performance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 60 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow (Yield) | 8.20 | MPa | ISO 37 |
| Tensile Elongation - Across Flow (Break) | 860 | % | ISO 37 |
| Tear Strength - Across Flow 1 | 20 | kN/m | ISO 34-1 |
| Compression Set 2 | ISO 815 | ||
| 23°C, 72 hr | 24 | % | |
| 70°C, 22 hr | 35 | % | |
| 100°C, 22 hr | 41 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 to 200 | °C | |
| Middle Temperature | 200 to 210 | °C | |
| Front Temperature | 210 to 220 | °C | |
| Nozzle Temperature | 220 to 230 | °C | |
| Mold Temperature | 15.0 to 50.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 160 | °C | |
| Cylinder Zone 2 Temp. | 160 to 170 | °C | |
| Cylinder Zone 3 Temp. | 170 to 180 | °C | |
| Cylinder Zone 4 Temp. | 180 to 190 | °C | |
| Cylinder Zone 5 Temp. | 180 to 200 | °C |
| Note Message | |
|---|---|
| 1 . | Method C, Crescent |
| 2 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR PP CONC 36 NAT S | PolyOne Corporation | PP, Unspecified | Maxxam™ FR |
| Sindustris PBT TE5001SP | Sincerity Australia Pty Ltd. | PC+PBT | Sindustris PBT |
| 3M™ Dyneon™ PTFE Compound TF 4105 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| KumhoSunny PBT/PET HEB4051M | Shanghai KumhoSunny Plastics Co., Ltd. | PBT+PET | KumhoSunny PBT/PET |
| LUVOCOM® 1200-8835 | Lehmann & Voss & Co. | ABS | LUVOCOM® |
