Order Products : sales@su-jiao.com
Favorite INSTATEAR
| Category: | PE Alloy , Polyethylene Alloy |
| Manufacturer: | Favorite Plastics |
| Trademark: | Favorite |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hXFAQr_Favorite-INSTATEAR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| INSTATEAR is a PE blend that allows unique machine direction linear tear. This film is ideal for packaging that requires quick uniform access, such as medical devices and supplies, thermoforming and certain food packaging. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.928 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 1.2 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (vs. Itself - Static) | 0.50 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 51 | µm | |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 15.2 | MPa | |
| Break | 16.9 | MPa | |
| Tensile Elongation - MD (Break) | 640 | % | ASTM D882 |
| Dart Drop Impact | 250 | g | ASTM D1709 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 23 | ASTM D2457 | |
| Haze | 32 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E185 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| ADMER™ NF908E | Mitsui Chemicals Europe GmbH | LLDPE | ADMER™ |
| APEX® 84855 | Teknor Apex Company | PVC, Flexible | APEX® |
| LubriOne™ NN-30GF/15T NC059 | PolyOne Corporation | Nylon 66 | LubriOne™ |
| NEOFLON™ EP-541 | DAIKIN AMERICA, INC. | ETFE | NEOFLON™ |
