Order Products : sales@su-jiao.com
DynaMix Lite™ 3244-GB
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix Lite™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hREY9H_DynaMix-Lite-3244-GB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glass Bead Filled PEEK Features:
Applications:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4830 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.5 | % | ASTM D638 |
| Flexural Modulus | 5170 | MPa | ASTM D790 |
| Flexural Strength | 138 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 59 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 149 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Rear Temperature | 349 to 382 | °C | |
| Middle Temperature | 354 to 388 | °C | |
| Front Temperature | 360 to 393 | °C | |
| Nozzle Temperature | 360 to 399 | °C | |
| Processing (Melt) Temp | 343 to 399 | °C | |
| Mold Temperature | 149 to 218 | °C | |
| Injection Rate | Moderate | ||
| Screw Speed | 40 to 70 | rpm | |
| Clamp Tonnage | 5.5 to 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 203 C TFE 20 | RTP Company | Nylon 11 | RTP |
| UBE Polyethylene Z322 | UBE America, Inc. | PE, Unspecified | UBE Polyethylene |
| Unichem 7816 | Colorite Polymers | PVC, Unspecified | Unichem |
| Nanjing Hongrui PA6 B850 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 6 | Nanjing Hongrui PA6 |
| EPT 1045 | Mitsui Chemicals, Inc. | EPDM | EPT |
