Order Products : sales@su-jiao.com

Epoxies, Ect. 10-3005 NS

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Epoxies, Etc.
Trademark:	Epoxies, Ect.
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hQOxi8_Epoxies-Ect-10-3005-NS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

5 MINUTE SET NON-SAG EPOXY

These high bond strength adhesives are clear 100% solids, two component, non-sag adhesives with a quick setting time of 5-46 minutes at room temperature. They are excellent for bonding plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc...

These adhesives were tested in our laboratory for flame retardancy properties. According to our test results they meet the requirements of UL94HB.

Applications:

These unique adhesives are ideally suited for a wide range of electronic, electrical, industrial, structural, and jewelry applications. These adhesives are also an excellent choice for field repairs. They are offered in the popular TriggerBond® dual barrel cartridge dispensing system and bulk packaging.

Features:

Non-sag consistency

High bond strength

Fast room temperature cure - three speeds to choose from

Water & chemical resistance

Outstanding thermal shock resistance

1:1 mix ratio

Impact resistance

General Information
Features	Bondability Fast Cure Good Adhesion Good Chemical Resistance Good Impact Resistance Good Thermal Shock Resistance High Clarity Low to No Water Absorption Thixotropic
Uses	Adhesives Bonding Electrical Parts Electrical/Electronic Applications Industrial Applications Jewelry
Appearance	Clear/Transparent

Impact	Nominal Value	Unit
Notched Izod Impact	140	J/m

Thermal	Nominal Value	Unit
CLTE - Flow	6.0E-5	cm/cm/°C

Additional Information	Nominal Value	Unit
Handle Time (25°C)	15.0 to 20.0	min
Operating Temperature	-50.0 to 130	°C

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Mix Ratio by Weight (PBW)
Part A	1.0
Part B	1.0
Mix Ratio by Volume (PBV)
Part A	1.0
Part B	1.0
Solids Content	100	%
Density (25°C)	1.15	g/cm³
Curing Time (25°C)	24 to 48	hr
Pot Life (25°C)	3.0 to 5.0	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore D)	86
Compression Strength	58.6	MPa
Electric Strength	17	kV/mm
Relative Permittivity (1 kHz, 25°C)	4.00
Volume Resistivity (25°C)	2.0E+14	ohms·cm
Dissipation Factor (1 kHz)	0.017

Resin Grade	Manufacturer	Category	Trademark
Niplene F30 AGR HI	Soredi S.p.a.	PP Homopolymer	Niplene
MAJORIS FFR367 - 8487	AD majoris	PP Copolymer	MAJORIS
MAJORIS HFR671 - 8487	AD majoris	PP, Unspecified	MAJORIS
EPAMOULD 293A33	Epaflex Polyurethanes S.R.L.	TPU-Polyester	EPAMOULD
ULTEM™ DT1810EV resin	SABIC Innovative Plastics	PEI	ULTEM™