Order Products : sales@su-jiao.com

NuSil MED-6015

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hPe17N_NuSil-MED-6015.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: 1.41 R.I., OPTICALLY CLEAR, LOW VISCOSITY

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: 1.41 R.I., OPTICALLY CLEAR, LOW VISCOSITY

General Information
Features	Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Optical	Nominal Value
Refractive Index	1.410

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.03	g/cm³
Viscosity
-- ¹	0.090	Pa·s
-- ²	6.0	Pa·s
Curing Time (150°C)	0.25	hr
Pot Life (25°C)	240	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	50
Tensile Strength	8.96	MPa
Tensile Elongation at Break	100	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Sindustris ABS LLG810W	Sincerity Australia Pty Ltd.	ABS	Sindustris ABS
K-Prene 7000 XL 60	Technovinyl Polymers India Ltd.	TPV	K-Prene
Karina COMP. PVC WHITE -E 800-10/ 1-CY-RT	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
OTECH TPO OTO9588 - Cord Insulation	OTECH Corporation	TPO	OTECH TPO
Sylvin 9067-90 Orange 533	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin