Order Products : sales@su-jiao.com
KYDEX® 2200LT
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | SEKISUI Polymer Innovations, LLC |
| Trademark: | KYDEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hOqYsg_KYDEX-2200LT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KYDEX ® 2200LT is a high performance thermoplastic sheet designed for use in mass transit interior applications where SMP800C or BSS7239 compliance is required. General Information KYDEX ® 2200LT is a cost effective alternative to FRP that offers the additional benefit of weight savings. It meets the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) requirements for smoke emission and flammability as tested under ASTM E-662 and ASTM E-162. Additionally, KYDEX ® 2200LT meets the toxicity criteria defined by SMP800C and BSS7239. Suggested Applications
Features
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 108 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (3.18 mm) | 3900 | MPa | ASTM D638 |
| Tensile Strength (Yield, 3.18 mm) | 52.7 | MPa | ASTM D638 |
| Flexural Modulus (3.18 mm) | 3110 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 77.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 140 | J/m | ASTM D256 |
| Gardner Impact | ASTM D5420 | ||
| -- | 40.9 | J | |
| -29°C | 14.2 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed, 3.18 mm | 89.0 | °C | |
| 1.8 MPa, Annealed, 3.18 mm | 89.0 | °C | |
| CLTE - Flow | 5.4E-5 | cm/cm/°C | ASTM E831 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Spread Index - No Burning Drip | < 35.0 | ASTM E162 | |
| Smoke Density | ASTM E662 | ||
| 1.5 min | < 100 | ||
| 4.0 min | < 200 | ||
| Toxic Gas Emissions | |||
| Boeing (BSS 7239) | Pass | ||
| Bombardier (SMP 800-C) | Pass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuang-Bang HW-5050 | Shuang-Bang Industrial Corp. | Film, TPU | Shuang-Bang |
| CALP 4907G-3 | Lion Idemitsu Composites Co., Ltd. | PP, Unspecified | CALP |
| Axiall PVC 7555 White | Axiall Corporation | PVC, Rigid | Axiall PVC |
| CYCOLAC™ INP449 resin | SABIC Innovative Plastics | ABS+SAN | CYCOLAC™ |
| Sylvin 8773-60D Grey 9509 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
