Order Products : sales@su-jiao.com
Adsyl 7415 XCP
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Adsyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hLlbil_Adsyl7415XCP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adsyl 7415 XCP is an advanced polyolefin, specially designed for use as a sealing layer in co- extruded film applications. This grade features a low seal initiation temperature and good optics. It does not contain slip or anti-block additives. It is available in natural pellets. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.90 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 14 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 1 | 600 | MPa | ASTM D790A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 70.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 1.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefabloc® TP SD 310 90A | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| EUROPLEX® Film HC 0F028 | Evonik Industries AG | PVDF+PMMA | EUROPLEX® Film |
| HiFill® HIPS TM40 WT | Techmer Engineered Solutions | PS (HIPS) | HiFill® |
| Lifoflex® GB 1060 | Müller Kunststoffe GmbH | SEBS | Lifoflex® |
| Dow Corning® MG-2502 | Dow Corning Corporation | Silicone | Dow Corning® |
