Order Products : sales@su-jiao.com
Gallonprene® GP420-7002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hLFLlr_Gallonprene-GP420-7002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP420-7002 is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in Africa and the Middle East, Latin America or Asia Pacific. Gallonprene®GP420-7002 application areas include engineering/industrial accessories, consumer goods and handles. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/2.16 kg) | 15 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 5.00 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 450 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 140 - 160 | °C | |
| Middle Temperature | 150 - 170 | °C | |
| Front Temperature | 160 - 180 | °C | |
| Processing (Melt) Temp | 120 - 140 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Processing Temperature Limit: 220°CInjection Pressure: ModerateBack Pressure: 20 to 50%Overmolding Parameters:Rear Temperature: 155 to 175°CCenter Temperature: 165 to 185°CFront Temperature: 175 to 195°CMelt Temperature: 120 to 140°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 220°CInjection Pressure: ModerateInjection Speed: ModerateBack Pressure: 20 to 50% |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BY36BK6595 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Huafon HF-1265AP | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| Luxus PP 16250 | Luxus Limited | PP, Unspecified | Luxus PP |
| Neoflex™ 8080 | Zylog Plastalloys Pvt. Ltd. | TPE | Neoflex™ |
| XYLEX™ X7200MR resin | SABIC Innovative Plastics Asia Pacific | PC+Polyester | XYLEX™ |
