Order Products : sales@su-jiao.com
Duratron® U1000
| Category: | PEI , Polyether Imide |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Duratron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hHS9Pg_Duratron-U1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Duratron® U1000 polyetherimide is an amorphous, high-performance polymer with exceptional flame and heat resistance. It performs continuously to 340°F (171°C), making it ideal for high strength/high heat applications, and those requiring consistent dielectric properties over a wide frequency range. It is hydrolysis resistant, highly resistant to acidic solutions and capable of withstanding multiple autoclaving cycles. Duratron® 1000 is FDA and USP Class VI compliant. FDA compliant colors of Duratron® PEI are also available on a custom basis. Duratron® PEI commonly is machined into parts for reusable medical devices, analytical instrumentation, electrical/electronic insulators and a variety of structural components requiring high strength and rigidity at elevated temperatures. Data provided by Quadrant Engineering Plastic Products from tests on stock shapes and parts produced by Quadrant EPP. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.25 | % | |
| Saturation | 1.3 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 112 | ||
| R-Scale | 125 | ||
| Durometer Hardness (Shore D) | 86 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3450 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 117 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 60 | % | ASTM D638 |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 138 | MPa | ASTM D790 |
| Compressive Modulus | 3310 | MPa | ASTM D695 |
| Compressive Strength (10% Strain) | 152 | MPa | ASTM D695 |
| Shear Strength | 103 | MPa | ASTM D732 |
| Coefficient of Friction (vs. Steel - Static) | 0.42 | Internal Method | |
| Wear Factor | 5800 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 27 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 204 | °C | ASTM D648 |
| Maximum Use Temperature - Long Term, Air | 171 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Limiting Pressure Velocity 1 | 0.0657 | MPa·m/s | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 210 | °C | ASTM D3418 |
| CLTE - Flow 2(-40 to 149°C) | 5.6E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.18 | W/m/K | ASTM F433 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 3 | > 1.0E+13 | ohms | Internal Method |
| Dielectric Strength 4 | 33 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 3.15 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 1.3E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | 4:1 safety factor |
| 2 . | 68°F |
| 3 . | EOS/ESD S11.11 |
| 4 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reny® NXG5945S | Mitsubishi Engineering-Plastics Corp | PARA | Reny® |
| Europrene® N 2860 | Versalis S.p.A. | NBR | Europrene® |
| EPO-TEK® H70E-4 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| LEXAN™ EXRL2032 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| LNP™ THERMOCOMP™ RZ006S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
