Order Products : sales@su-jiao.com
Precision Polymer E60H
| Category: | EPDM , Ethylene Propylene Diene Terpolymer |
| Manufacturer: | Precision Polymer Engineering Ltd. |
| Trademark: | Precision Polymer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | h8cZzm_Precision-Polymer-E60H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sulphur cured, off-white Ethylene Propylene Terpolymer, 55-65 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA) to be in accordance with Code of Federal Regulations Title (CFR21), Section 177.2600. Extraction tested in distilled water. Suitable for repeated use with dry and aqueous foodstuffs intended for human consumption. Not suitable for use with fatty foodstuffs. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| IRHD Hardness | 60 | ASTM D1415, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 13.8 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 250 | % | ASTM D412, ISO 37 |
| Compression Set | |||
| 100°C, 24 hr | 64 | % | ASTM D395B |
| 100°C, 24 hr 1 | 64 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (125°C, 168 hr) | -20 | % | ASTM D412, ISO 37 |
| Change in Ultimate Elongation in Air (125°C, 168 hr) | -20 | % | ASTM D412, ISO 37 |
| Change in IRHD Hardness in Air (125°C, 168 hr) | 15 | ASTM D573, ISO 188 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | 150 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Resistance - Non-brittle for 3 minutes | |||
| -- | -45 | °C | ISO R812 |
| -- | -45 | °C | ASTM D2137 |
| Minimum Operating Temperature: -40°C (-40°F) |
| Note Message | |
|---|---|
| 1 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom PP7120 | Spartech Polycom | PP Copolymer | Spartech |
| TAIRILAC AE8000 | Formosa Plastics Corporation | ABS | TAIRILAC |
| BUP 631 | Bonyan Kala Chemie Company | Polyester, TS | BUP |
| Clearflex® RM 50 U | Versalis S.p.A. | LMDPE | Clearflex® |
| INEOS PP T00G-00 | INEOS Olefins & Polymers USA | TPO | INEOS PP |
