Prime PP PO 500

Category:	PP Copolymer , Polypropylene Copolymer
Manufacturer:	Primex Plastics Corporation
Trademark:	Prime PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	h6LQT1_Prime-PP-PO-500.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PO 500 is a Polyolefin that has many of the physical properties of a Copolymer Polypropylene. The melt index, density, flex modulus, heat deflection and izod are typical of Polypropylene. Standard grades of Polypropylene have a very small processing window with very little hot strength. This product was designed for thermoforming and has better hot melt strength than typical Polypropylene. Some resin manufacturers offer a high hot strength PP, however, it carries a premium. Applications: PO 500 was designed for any thermoformed product that requires a Polypropylene material. It is ideal for roll fed forming as well as large cut sheet forming. Processing: PO 500 thermoforms like HDPE. The mold shrink may be slightly higher than Polypropylene. Finishing: The same type of finishing techniques used on Polypropylene may be used on our PO 500 product. It may be cut or trimmed by sawing, routing, drilling, die cutting or punching. It may be fabricated to other PO 500 parts by sonic welding. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: PO 500 can be color matched to your specific requirements. The same textures are available for PO 500 as for any Polypropylene. A range of thicknesses from .013 to .400 are available with widths up to 120".

Message

PO 500 is a Polyolefin that has many of the physical properties of a Copolymer Polypropylene. The melt index, density, flex modulus, heat deflection and izod are typical of Polypropylene. Standard grades of Polypropylene have a very small processing window with very little hot strength. This product was designed for thermoforming and has better hot melt strength than typical Polypropylene. Some resin manufacturers offer a high hot strength PP, however, it carries a premium.

Applications:
PO 500 was designed for any thermoformed product that requires a Polypropylene material. It is ideal for roll fed forming as well as large cut sheet forming.

Processing:
PO 500 thermoforms like HDPE. The mold shrink may be slightly higher than Polypropylene.

Finishing:
The same type of finishing techniques used on Polypropylene may be used on our PO 500 product. It may be cut or trimmed by sawing, routing, drilling, die cutting or punching. It may be fabricated to other PO 500 parts by sonic welding.

Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process.

Colors, Textures and Capabilities:
PO 500 can be color matched to your specific requirements. The same textures are available for PO 500 as for any Polypropylene. A range of thicknesses from .013 to .400 are available with widths up to 120".

General Information
Features	Copolymer High Impact Resistance High Tensile Strength Ultrasonic Weldable
Appearance	Colors Available
Forms	Sheet
Processing Method	Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.918	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.35	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.2 to 1.8	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Elongation (Break)	280	%	ASTM D638
Flexural Modulus	1240	MPa	ASTM D790

Impact	Nominal Value	Test Method
Notched Izod Impact		ASTM D256
-40°C	No Break
23°C	No Break

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	70.6	°C
0.45 MPa, Annealed	91.7	°C
CLTE - Flow	1.4E-5	cm/cm/°C	ASTM D696

Resin Grade	Manufacturer	Category	Trademark
SABIC® PP RA1E10	Saudi Basic Industries Corporation (SABIC)	PP Random Copolymer	SABIC® PP
BCC Resins BC 8990	BCC Products Inc.	TSU	BCC Resins
BP RPP 3005 GR BLK	Buckeye Polymers, Inc.	PP, Unspecified	BP
Aurora PVC AP3276 Series	Aurora Plastics, Inc.	PVC, Rigid	Aurora PVC
Hoffman PVC V7-54	Hoffman Plastic Compounds Inc.	PVC, Rigid	Hoffman PVC