Order Products : sales@su-jiao.com
MAJORIS EB619
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | h3YW79_MAJORIS-EB619.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EB619 is a natural, 65% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB619) but other colours can be supplied on request. EB619 has been developed for applications where high density, good impact strength, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.87 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.1 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1830 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 27.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 1.9 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 3350 | MPa | ISO 178 |
| Flexural Stress | 51.5 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 15 | kJ/m² | ISO 179/1eU |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo DAP FS-6 CAF | Sumitomo Bakelite North America, Inc. | DAP | Sumitomo DAP |
| WPP TPO TPO-2562 P Black | Washington Penn Plastic Co. Inc. | TPO | WPP TPO |
| UBESTA 3035 JU5 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| Alcryn® 2165 TR | Advanced Polymer Alloys | MPR | Alcryn® |
| Daelim Po1y® XP9500S | DAELIM INDUSTRIAL CO., LTD. | mLLDPE | Daelim Po1y® |
