NEFTEKHIM PE 6949C

Category:	HDPE , High Density Polyethylene
Manufacturer:	Nizhnekamskneftekhim Inc.
Trademark:	NEFTEKHIM PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	h3Pa3a_NEFTEKHIM-PE-6949C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxidant, thermostabilizer, processing aid, dispersing aid, carbon black. Application: tubes and fittings for gas distribution network, and also pressure pipes and fittings for cold potable water supply systems. Specification: TU 2211-150-05766801-2009

General Information
Additive	Processing aid Antioxidation heat stabilizer acid neutralizer Carbon black
Features	Antioxidation Dispersible Workability, good acid resistance Thermal Stability
Uses	Piping system Pipe fittings Accessories
Agency Ratings	PPI PE-80
Forms	Particle
Processing Method	Pipeline extrusion molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	0.10 - 0.40	g/10 min	ASTM D1238
Melt Flow Ratio - MFR 21.6 kg/MFR 5.0 kg			ASTM D1238
Carbon Black Content	2.0 - 2.5	%	ISO 6964

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	> 21.0	MPa	ASTM D638
Tensile Elongation (Break)	> 500	%	ASTM D638

Additional Information
MFR spread within the lot, max: 10%Type of carbon distribution: A1, A2, A3, BMass fraction of volatiles, max: 350 mg/kgThermal Stability at 200°C, min, not less than: 20Resistance to slow crack propagation at 80°V and initial stress at the pipe wall 4.6 MPa, on pipes d 110 mm with SDR 11 or d 160 mm with SDR 11, min: 165 hrResistance to gas components at 80°C and initial stress at pipe wall 2 MPa, on pipes d 32 mm with SDR 11, min: 20 hrLower confidence limit of long-term strength, GOST ISO 12162: >10 MPa

Additional Information

MFR spread within the lot, max: 10%Type of carbon distribution: A1, A2, A3, BMass fraction of volatiles, max: 350 mg/kgThermal Stability at 200°C, min, not less than: 20Resistance to slow crack propagation at 80°V and initial stress at the pipe wall 4.6 MPa, on pipes d 110 mm with SDR 11 or d 160 mm with SDR 11, min: 165 hrResistance to gas components at 80°C and initial stress at pipe wall 2 MPa, on pipes d 32 mm with SDR 11, min: 20 hrLower confidence limit of long-term strength, GOST ISO 12162: >10 MPa

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene FRP102-01	RheTech, Inc.	PP, Unspecified	RheTech Polypropylene
TEREZ PA 6 7750 T GF 30	TER HELL PLASTIC GMBH	Nylon 6	TEREZ PA 6
VENELENE® FD-0348	Poliolefinas Internacionales, C.A. (Polinter)	LDPE	VENELENE®
Vyncolit® RX®1-520	Vyncolit N.V.	DAP	Vyncolit®
Electrafil® ABS CF25 BK	Techmer Engineered Solutions	ABS	Electrafil®