Order Products : sales@su-jiao.com

COPEC® CC7FDN (Series: VS/CR/AD1)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	COPEC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	h3OmDc_COPECCC7FDNSeriesVSCRAD1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The VS/CR/AD1 Series is your material solution for applications in the consumer electronics section. The series features an exceptionally silky and velvety surface, accompanied by an outstanding resistance to skin oil, sun cream and olive oil. The compounds convince due to their excellent adhesion to polar thermoplastics such as ABS, PC and PC/ABS.

Typical applications

Ear phones

Game consoles

Handles and grips for consumer applications

Remote controls

Seals

Material advantages

Easy coloring (compounds in natural colors)

Excellent color stability

Good weathering resistance

Insert molding possible

Pleasant surface feel (Soft touch)

Resistance against skin oil, sunscreens and olive oil

Smooth and silky surface

UL 94 HB listed

General Information
Features	Good coloring Good adhesion Good weather resistance Oil resistance Excellent appearance
Uses	Handle Electrical/Electronic Applications Seals Soft handle
Appearance	Natural color
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.20	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	73		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Break)	9.50	MPa	ISO 37
Tensile Elongation ²(Break)	850	%	ISO 37
Tear Strength ³	28	kN/m	ISO 34-1

Additional Information	Nominal Value	Unit	Test Method
Adhesion to ABS	34.0	kN/m	Renault D41/1916
Adhesion to PC	31.0	kN/m	Renault D41/1916

Extrusion	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time	4.0	hr
Suggested Max Moisture	0.020	%
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	180	°C
Cylinder Zone 3 Temp.	200	°C
Die Temperature	220	°C

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method B, right-angle specimen (cut)

Resin Grade	Manufacturer	Category	Trademark
Telcar® DE 5052	Teknor Apex Asia Pacific PTE. LTD.	TPE	Telcar®
Nylfor® A2 E6/3E NATURALE	SO.F.TER. SPA	Nylon 66	Nylfor®
LARIPUR® LPR 5520	COIM S.p.A.	TPU-Polyester	LARIPUR®
Plaslube® POM CO TL2 MB	Techmer Engineered Solutions	Acetal (POM) Copolymer	Plaslube®
Iupilon® ELV2010	Mitsubishi Engineering-Plastics Corp	PC	Iupilon®