Order Products : sales@su-jiao.com
Epoxies, Ect. 50-3100 (Cat.190)
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | h13exU_Epoxies-Ect-50-3100-Cat-190-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
50-3100 is designed for the fastest and most continuous high heat transfer. 50-3100 measures several times faster heat dissipation than other commercially available types. The most important breakthrough is the handling of 50-3100. This system can be easily mixed and poured to form a dimensionally stable heat transfer package. Typical applications include encapsulation of power supplies, transformers, coils, insulators, protective covering for chips, temperature probes, etc… |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.30 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 3.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 2.2 | W/m/K | |
| Heat Distortion | 120 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -60.0 to 205 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Mix Ratio by Weight (PBW) | |||
| Part A | 100 | ||
| Part B | 5.0 | ||
| Density (25°C) | 2.00 | g/cm³ | |
| Viscosity | |||
| 25°C 1 | 32 | Pa·s | |
| 25°C 2 | 180 | Pa·s | |
| Curing Time | |||
| 66°C | 2.0 | hr | |
| 25°C | 24 | hr | |
| Pot Life (25°C) | 45 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 90 | ||
| Tensile Strength | 60.7 | MPa | |
| Compression Strength | 103 | MPa | |
| Electric Strength | 19 | kV/mm | |
| Relative Permittivity (60 Hz) | 6.40 | ||
| Volume Resistivity | 1.5E+15 | ohms·cm | |
| Dissipation Factor (60 Hz) | 0.015 |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XYRON™ 1950J | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| ExxonMobil™ LDPE LD 100.BW | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| Ferro PP LPP40YR03WH | Ferro Corporation | PP Copolymer | Ferro PP |
| Hostaform® SXT90Z-02 XAP | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| MAJORIS DT267 | AD majoris | PP, Unspecified | MAJORIS |
