Order Products : sales@su-jiao.com

SOLPLAST TC 4000A

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	UTEKSOL d.o.o.
Trademark:	SOLPLAST TC
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	h0Hayl_SOLPLAST-TC-4000A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles. Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm. For coloring masters are used on a polyolefine base (PE, EVA). SERIES 4000 Mat or shine-mat surface with good expressed rubber-looked effect Expanded or compact surface look. Suitable for medium demanded thin and thick soles.

Message

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles.

Resistance to acid, bases and all aqueous solutions is excellent.

Resistance to alcohol and glycols is medium good.

Resistance to aromatic hydrocarbons, fat and of oil is bad.

All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm.

For coloring masters are used on a polyolefine base (PE, EVA).

SERIES 4000

Mat or shine-mat surface with good expressed rubber-looked effect

Expanded or compact surface look.

Suitable for medium demanded thin and thick soles.

General Information
Features	Acid Resistant Base Resistant
Uses	Footwear
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.950 to 0.990	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	56 to 75		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	4.50 to 5.50	MPa	ISO 527-2
Tensile Strain (Break)	600 to 610	%	ISO 527-2
Abrasion	210 to 250	mm³

Resin Grade	Manufacturer	Category	Trademark
Nipol® SBR 1739	Zeon Corporation	SBR, Emulsion	Nipol® SBR
Evermore PUR SA-6010P	Evermore Chemical Industry Co., Ltd.	PUR, Unspecified	Evermore PUR
Sumiliteresin® PR-14170	SBHPP	Phenolic	Sumiliteresin®
LNP™ THERMOCOMP™ AF002 compound	SABIC Innovative Plastics	ABS	LNP™ THERMOCOMP™
Durethan® BKV 230 H2.0 DUS008 000000	LANXESS GmbH	Nylon 6	Durethan®