Order Products : sales@su-jiao.com
POLYCOMPO PE 2015M
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gzQF9u_POLYCOMPO-PE-2015M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 2015M is a Linear Low Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific. Primary characteristic: creep resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 1.2 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 56 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 370 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 240 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 99.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 122 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S 40HS 100 E NAT | Radici Plastics | Nylon 6 | Radilon® |
| Tekumid 6 T/GF 50 | TEKUMA Kunststoff GmbH | Nylon 6 | Tekumid |
| DAI-EL™ G-723F | Daikin Fluorochemicals (China) Co., Ltd. | Fluorelastomer | DAI-EL™ |
| GELOY™ XTWE480 resin | SABIC Innovative Plastics Asia Pacific | ASA | GELOY™ |
| Tribocomp® PA612 CF30 TS12 | Solvay Specialty Polymers | Nylon 612 | Tribocomp® |
