Order Products : sales@su-jiao.com
ALCUDIA® EBA PA-1770
| Category: | EBA , Ethylene Butyl Acrylate Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® EBA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gyKqha_ALCUDIA-EBA-PA-1770.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EBA ALCUDIA® PA-1770 is a copolymer suitable for general extrusion, injection moulding and compounds where good processability, flexibility and very good mechanical properties are required. The butyl acrylate content is 17%. It contains antioxidant additives. TYPICAL APPLICATIONS
Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-1770 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ISO 1133 |
| n-Butyl Acrylate Content | 17.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A | 90 | ||
| Shore D | 33 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 12.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 800 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 61.0 | °C | ISO 306/A |
| Melting Temperature | 93.0 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecodur® PB30 NL | Eurotec Engineering Plastics | PBT | Tecodur® |
| tefanyl® VE VEIP 215 | Mitsubishi Chemical Performance Polymers, Inc. | PVC+NBR | tefanyl® VE |
| TRIREX® 3025U(400) | Samyang Corporation | PC | TRIREX® |
| BAAF UHMW-PE 4000 NC | BAAF | HDPE, UHMW | BAAF UHMW-PE |
| CERTENE™ HI-863 | Muehlstein | HDPE | CERTENE™ |
