Order Products : sales@su-jiao.com
Sinvicomp SSZ6309 KD11
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | SINVICOMP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gvGwmN_SinvicompSSZ6309KD11.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp"SSZ 6309 KD11 is a wire & cable polyvinylchloride compound available in pellet form. SSZ 6309 KD11 provides good performance for jacketing of cables. |
| General Information | |
|---|---|
| Uses |
|
| Cable Type (BS 6746) |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Carbon Black Content | 1 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - 7 days, 80±2°C 1(80°C) | 0.500 | mg/cm² | IEC 811-3-2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 14.0 | MPa | IEC 60811-1-1 |
| Tensile Elongation (Break) | 250 | % | IEC 60811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength 2(70°C, 4 hr, in IRM 902 Oil) | 15 | % | IEC 60811-2-1 |
| Change in Ultimate Elongation 3(70°C, 4 hr, in IRM 902 Oil) | 25 | % | IEC 60811-2-1 |
| Changes in mechanical properties after hot air aging test, 80°C, 168 hr 4 | IEC 811-1-2 | ||
| Tensile strength change | 5 | % | IEC 811-1-2 |
| Change in tensile elongation | 10 | % | IEC 811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -28.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 1.0E+13 | ohms·cm | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Typical temperature profile for processing SINVICOMP compound is from 150°C to 175°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 150°CCompression zone: 160°C~170°CMixing zone: 170°C~175°CNozzle/Die Zone: 175°C |
| Note Message | |
|---|---|
| 1 . | 7 days, 80±2°C |
| 2 . | 70±2°C |
| 3 . | 70±2°C |
| 4 . | 80±2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrathane™ ALC-90A | Biomerics, LLC | TPU-PC | Quadrathane™ |
| SolVin 373ND | INOVYN | PVC, Unspecified | SolVin |
| LUVOCOM® PEEK CLASSIX 7957 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| MAXAMID™ EPDM66G43-BK | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Sylvin 6185-80 Orange 562 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
