TECHNYL® ALLOY KC 216 V12 BLACK Datasheet,Nylon 6+ABS,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® ALLOY KC 216 V12 Black is a grade based on a blend of polyamide 6 and acrylonitrile butadiene styrene, reinforced with 12% of glass fiber for injection moulding. This grade offers high mechanical properties, good dimensional stability and good processability. It is a synergistic blend material between Polyamide 6 and ABS with an ideal property combination, meaning that it has dual characteristics between semi-crystalline and amorphous polymers.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 12% filler by weight
Features	Good dimensional stability Good demoulding performance
Uses	Electrical appliances Power/other tools Industrial application Application in Automobile Field Consumer goods application field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA6+ABS-GF12

Physical	Dry	Conditioned	Unit	Test Method
Density	1.18	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	1.0	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	4800	2800	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	96.0	55.0	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	3.3	--	%	ISO 527-2
Flexural Modulus (23°C)	4300	2700	MPa	ISO 178
Flexural Stress (23°C)	160	80.0	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	4.0	--	kJ/m²	ISO 179/1eA
23°C	7.0	15	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	50	90	kJ/m²	ISO 179/1eU
23°C	50	90	kJ/m²	ISO 179/1eU
Notched Izod Impact (23°C)	8.0	16	kJ/m²	ISO 180
Unnotched Izod Impact Strength (23°C)	40	80	kJ/m²	ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	200	--	°C	ISO 75-2/Bf
Melting Temperature	220	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Comparative Tracking Index (Solution A)	575	--	V	IEC 60112

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	235 - 240	°C
Middle Temperature	240 - 250	°C
Front Temperature	250 - 260	°C
Mold Temperature	70 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 6+ABS , Polyamide 6 + ABS
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	guu1zg_TECHNYLALLOYKC216V12BLACK.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SIG3572	Teknor Apex Asia Pacific PTE. LTD.	PVC, Flexible	Sinvicomp
Zhongfa PP pp6	Yuyao Zhongfa Engineering Plastics Co. Ltd.	PP, Unspecified	Zhongfa
Urochem 136	Chemiplastica, Inc.	Urea Formald	Urochem
Dryflex® AM 75A203B	ELASTO	SEBS	Dryflex®
ALTECH® PA66 ECO 1000/506	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66