Order Products : sales@su-jiao.com

EVALENE® PP PRB0202

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	JG Summit Petrochemical Corporation
Trademark:	EVALENE® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gui9w2_EVALENEPPPRB0202.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

EVALENE® PRB0202 is perfect for applications where high clarity is required. This random PP grade also delivers good stiffness and impact strength, as well as excellent temperature resistance, making it ideal for hot- fill applications.

EVALENE® PRB0202 can be used in a variety of blow molding applications including extrusion blow molding (EBM) and injection blow molding (IBM).

FEATURES

Excellent clarity and aesthetic advantages

Ease of processing

Fast cycles

High gloss

Good mechanical properties

Meets Philippine FDA food contact requirements

Halal-certied

TYPICAL APPLICATIONS

Hot-fill packaging

Bottles for personal care products

Bottles for cosmetics packaging

Rigid packaging for consumer markets requiring high clarity

General Information
Features	Rigid, good Highlight Antistatic property Impact resistance, good Workability, good Fast molding cycle Definition, high Compliance of Food Exposure Random copolymer
Uses	Cosmetic Packaging Packaging Blow molding applications Bottle Hard packaging
Forms	Particle
Processing Method	Blow molding Extrusion blow molding Injection blowing molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	90		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 1% Secant ¹	1440	MPa	ASTM D638
Tensile Strength ²(Yield)	27.0	MPa	ASTM D638
Tensile Elongation ³(Yield)	24	%	ASTM D638
Flexural Modulus - 1% Secant ⁴	933	MPa	ASTM D790A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	82.0	°C	ASTM D648

Additional Information	Nominal Value	Unit
Blow Molding Mold Temperature	20 - 40	°C
Blow Molding Temperature	200	°C

Extrusion	Nominal Value	Unit
Melt Temperature	200	°C

Note Message
1 .	5.0 mm/min
2 .	50 mm/min
3 .	50 mm/min
4 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Mirakutoran® TPU E670MZAA	Japan Mirakutoran Inc.	TPU Alloy	Mirakutoran® TPU
EverGlide® SG5708T	Polymer Dynamix	PEEK	EverGlide®
Durolon® VR2500	Unigel Plásticos	PC	Durolon®
SABIC® PPcompound 8533	Saudi Basic Industries Corporation (SABIC)	PP, Unspecified	SABIC® PPcompound
Sylvin 9715-70 Grey 9486	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin