Order Products : sales@su-jiao.com
Devcon Edge & Seal T-35
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gugviV_Devcon-Edge-Seal-T-35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Tough, rubber-like urethane compound for making a broad range of repairs, and for tooling and molding applications. Intended Use:
Product Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.957 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 250 | mg/1000 cycles |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | |||
| Dry | 82 | °C | |
| Wet | 49 | °C |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.14 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 22.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Tear Strength | 75.3 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Resin | Mixing ratio by weight: 80 | ||
| Hardening method | Mixing ratio by weight: 20 | ||
| Pot Life (24°C) | 3.0 | min | |
| Thermoset Mix Viscosity | 5000 | cP |
| Additional Information |
|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 1.5 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LEF489 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Flexalloy® 9400-80 | Teknor Apex Company | PVC Elastomer | Flexalloy® |
| LUBEMID B27 GF20 NATURAL | LUBEN PLAST srl | Nylon 6 | LUBEMID |
| Sylvin 9077-82C Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LEXAN™ EXL1414 resin | SABIC Innovative Plastics | PC | LEXAN™ |
