Order Products : sales@su-jiao.com
Shinko-Lac® ABS SE-7
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gtGqzO_Shinko-Lac-ABS-SE-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Shinko-Lac ABS SE-7 is a high impact resistant grade of ABS that has superior extrusion processability as well as vacuum formability while maintaining a balance of rigidity, strength and glossiness. Typical applications of SE-7 include attaché cases, piping and suitcases. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 1.2 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 104 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2260 | MPa | ASTM D638 |
| Tensile Strength (Yield, 23°C) | 39.2 | MPa | ASTM D638 |
| Flexural Modulus (23°C, 6.35 mm) | 2260 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C, 6.35 mm) | 59.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 6.35 mm | 120 | J/m | |
| 0°C, 6.35 mm | 250 | J/m | |
| 23°C, 6.35 mm | 320 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 12.7 mm) | 91.0 | °C | ASTM D648 |
| CLTE - Flow | 9.0E-5 | cm/cm/°C | ASTM D696 |
| Specific Heat | 1670 | J/kg/°C | ASTM C351 |
| Thermal Conductivity | 0.21 | W/m/K | ASTM C177 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 to 200 | °C | |
| Cylinder Zone 2 Temp. | 200 to 220 | °C | |
| Die Temperature | 190 to 220 | °C | |
| Take-Off Roll | 80.0 to 110 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3582 TRN776 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Quadrant EPP CESTIFLAME PE-UHMW | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| Aclon™ 3280 | Honeywell | PCTFE | Aclon™ |
| Advanced Composites BJ4H-CS BDX | Advanced Composites, Inc. | PP, Unspecified | Advanced Composites |
| API II ABS 920 | API II, Inc. | ABS | API II |
