Sarlink® TPV X4145B-W1 BLACK (PRELIMINARY DATA) Datasheet,TPV,Teknor Apex Company-SHANGHAI SUSHENG

Message
SARLINK® X4145BW1 BLACK is a specially developed engineering material designed primarily for demanding consumer, industrial, and automotive applications. SARLINK® X4145BW1 BLACK is a low density, medium hardness thermoplastic vulcanizate that exhibits excellent compression set, flex fatigue, high and low temperature performance and very good chemical resistance including copper contact. This grade can be processed by injection molding, extrusion, and profile extrusion.

General Information
Features	Low Specific Gravity Low compressive deformability Low density Workability, good Good melt strength Good chemical resistance Heat resistance, high Fill Copper contact stability Elastic Medium hardness
Uses	O-rings Plug Bushing Large household appliances and small household appliances Washer Diaphragm Industrial application Home appliance components Seals Application in Automobile Field Rubber substitution Consumer goods application field Profile
RoHS Compliance	RoHS compliance
Appearance	Opacity Black
Forms	Particle
Processing Method	Extrusion Profile extrusion molding Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.960	g/cm³	ISO 1183

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shaw A, 5 seconds, extruded	45	ISO 868
Shore A, 5 seconds, injection molding	48	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain)	1.40	MPa	ISO 37
Tensile Stress - Across Flow (Break)	4.10	MPa	ISO 37
Tensile Elongation - Across Flow (Break)	500	%	ISO 37
Tear Strength - Across Flow ¹	20	kN/m	ISO 34-1
Compression Set			ISO 815
23°C, 22 hr	14	%	ISO 815
70°C, 22 hr	27	%	ISO 815

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	323	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	82	°C
Drying Time	3.0	hr
Rear Temperature	177 - 216	°C
Middle Temperature	177 - 216	°C
Front Temperature	177 - 216	°C
Nozzle Temperature	188 - 221	°C
Processing (Melt) Temp	182 - 221	°C
Mold Temperature	10 - 66	°C
Back Pressure	0.0689 - 1.03	MPa
Screw Speed	100 - 200	rpm
Screw L/D Ratio	20.0:1.0

Extrusion	Nominal Value	Unit
Drying Temperature	82	°C
Drying Time	3.0	hr
Cylinder Zone 1 Temp.	182 - 204	°C
Cylinder Zone 2 Temp.	182 - 204	°C
Cylinder Zone 3 Temp.	188 - 210	°C
Cylinder Zone 4 Temp.	188 - 210	°C
Melt Temperature	193 - 216	°C
Die Temperature	193 - 216	°C
Take-Off Roll	21 - 49	°C

Extrusion instructions
Screen Pack: 20 to 60 meshScrew: 3:1 Compression Ratio

Note Message
1 .	Method B, right-angle specimen (without cut)

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPV
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gtCQTL_SarlinkTPVX4145BW1BLACKPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 1300	RTP Company	PPS	RTP
ELITE™ 5220B	The Dow Chemical Company	EPE	ELITE™
Hostacom TRC 483N C12827	LyondellBasell Industries	PP Copolymer	Hostacom
Kumho KNB NdBR-40	Korea Kumho Petrochemical Co., Ltd.	NBR	Kumho KNB
LUVOCOM® 1105-0947/Vi3	Lehmann & Voss & Co.	PEEK	LUVOCOM®