Order Products : sales@su-jiao.com
RTP 6003-45A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gt0Wh2_RTP-6003-45A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bondable to PC/PMMA, PC/PBT |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 2.8 | % | ASTM D955 |
| Moisture Content | 0.040 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength 1 | |||
| PC/PBT | 3.5 | kN/m | |
| PC/PMMA | 4.2 | kN/m |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 0.965 | MPa | ASTM D412 |
| 100% strain | 1.31 | MPa | ASTM D412 |
| 300% strain | 2.41 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 4.14 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 900 | % | ASTM D412 |
| Tear Strength 2 | 21.0 | kN/m | ASTM D624 |
| Compression Set 3 | ASTM D395B | ||
| 23°C, 22 hr | 16 | % | ASTM D395B |
| 70°C, 22 hr | 66 | % | ASTM D395B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 193 - 238 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Pressure | 34.5 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | 90°, 20 in/min, RTP 55, Interface Failure |
| 2 . | C mould |
| 3 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 TFE 20 SI 5 | RTP Company | Nylon 66 | RTP |
| PRIMALENE WPP692MD | Southern Polymer, Inc. | mLLDPE | PRIMALENE |
| Forprene® 6NM901A60 | SO.F.TER. SPA | TPV | Forprene® |
| TechnoMid PA6 S | TechnoCompound GmbH | Nylon 6 | TechnoMid |
| LNP™ THERMOCOMP™ RF0069SZ compound | SABIC Innovative Plastics Asia Pacific | Nylon 66 | LNP™ THERMOCOMP™ |
