Order Products : sales@su-jiao.com
Magnobond 86
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Magnolia Plastics, Inc. |
| Trademark: | Magnobond |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | grFSQh_Magnobond-86.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Magnobond 86 is an Epoxy; Epoxide (Epoxy) product. It is available in North America. Typical application: Foam. Primary characteristic: heat resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.803 | g/cm³ | ASTM D1505 |
| Water Absorption (24 hr) | 0.12 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Strength | 92.4 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 8.0 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Demold Time (25°C) | 1400 | min | |
| Post Cure Time (93°C) | 2.0 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Ject® 6100-18 | Premix, Inc. | TS, Unspecified | Premi-Ject® |
| TECHLEN H2302F | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| NEFTEKHIM PP 1424J (PH384) | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| DURANEX® GFR330 | Polyplastics Co., Ltd. | PBT | DURANEX® |
| Lucky Enpla LMF6300 | Lucky Enpla Co LTD | PP, Unspecified | Lucky Enpla |
