Order Products : sales@su-jiao.com
AURUM® JCF3030
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | AURUM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gphZrt_AURUMJCF3030.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Molding Shrinkage | Internal method | ||
| Flow | 0.0 | % | Internal method |
| Transverse flow | 0.70 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 195 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Modulus | 14200 | MPa | ASTM D790 |
| Flexural Strength | 276 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 246 | °C | ASTM D648 |
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow | 6.0E-6 | cm/cm/°C | ASTM D696 |
| Lateral | 4.5E-5 | cm/cm/°C | ASTM D696 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ C30US | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| Generic Nylon 66+Nylon 6I/X - Glass Fiber | Generic | Nylon 66+Nylon 6I/X | Generic |
| InnoTuf® TP-4051 | Innovative Polymers, Inc. | TSU | InnoTuf® |
| POLYCOMPO PP J705UG | POLYCOMPO Co.,Ltd. | PP, Unspecified | POLYCOMPO PP |
| Bapolene® 108A | Bamberger Polymers, Inc. | LDPE | Bapolene® |
