Order Products : sales@su-jiao.com
Toyolac® TP10
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Toray Resin Company |
| Trademark: | Toyolac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | goqUbt_Toyolac-TP10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Toyolac® TP10 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.05 | g/cm³ | ASTM D792 |
| 23°C | 1.05 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 26 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.50 to 0.70 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 23°C) | 109 | ASTM D785, ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| -- | 46.0 | MPa | ASTM D638 |
| 23°C | 53.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Break | 10 | % | ASTM D638 |
| Break, 23°C | 13 | % | ISO 527-2 |
| Flexural Modulus | |||
| -- | 2160 | MPa | ASTM D790 |
| 23°C | 2200 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 73.0 | MPa | ASTM D790 |
| 23°C | 75.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 13 | kJ/m² | ISO 179 |
| Notched Izod Impact | ASTM D256 | ||
| 23°C, 3.20 mm | 69 | J/m | |
| 23°C, 12.7 mm | 190 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.40 mm) | 86.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 95.0 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+11 | ohms | ASTM D257 |
| Electrostatic Voltage 1(23°C) | 660 | V | Internal Method |
| Half-life of Electrostatic Voltage Decay 2(23°C) | 0.4 | sec | Internal Method |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 50%, 24 hr |
| 2 . | 50%, 24 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 D GB 20 TFE 13 SI 2 | RTP Company | Nylon 612 | RTP |
| Dryflex庐 600900S | ELASTO | SEBS | Dryflex® |
| DuraStar™ DS2010 | Eastman Chemical Company | Polyester, TP | DuraStar™ |
| Lifoflex® UV 80 GC 1080 | ELASTO | SEBS | Lifoflex® |
| LUVOCOM® 80-8387/EM | LEHVOSS Group | Acetal (POM) Copolymer | LUVOCOM® |
