| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gmFGc2_Braskem-PE-LL4400-SFC.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
LL4400SFC is a Linear Low Density Polyethylene that shows specific quality controls for monosil and other Wire and Cable applications. This product contains antioxidant additives and low gel content. Applications: Recommended to monosil process; insulation for low voltage XLPE wires and cables. Process: The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. The optimum processing conditions are 170 - 210 °C. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.7 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 800 | % | ASTM D638 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 41 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 2.20 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 3.0E-4 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makroblend® UT403 | Covestro - Polycarbonates | PC+PET | Makroblend® |
| Radilon® A 38 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| RJM SL702M3T | RJM International, Inc. | PP, Unspecified | RJM |
| TUFNYL® SMF 15 BLACK | SRF Ltd. | Nylon 6 | TUFNYL® |
| Dynacom 701-GR12 | Dynachem Co. Ltd. | PP Copolymer | Dynacom |