Order Products : sales@su-jiao.com
Kemcor HD 4003
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gkeUIb_Kemcor-HD-4003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). HD 4003 meets the following specifications: ASTM D1248 - 1984 III A4 Grade E9 BS 6234 - 1987 Type HO3 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 650 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 25.0 | MPa | |
| Break | 26.0 | MPa | |
| Tensile Elongation (Break) | 620 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 185 to 205 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECASINT™ 2021 | Ensinger Inc. | PI, TP | TECASINT™ |
| XANTAR® 18 UR | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Generic Nylon 6+ABS | Generic | Nylon 6+ABS | Generic |
| GLS PC MG26 | GLS Polymers Pvt. Ltd. | PC | GLS PC |
| Plasmer 1040DN/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
