Order Products : sales@su-jiao.com
ADMER™ L2100
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gk7Qwt_ADMER-L2100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® L2100 is a maleic anhydride grafted LLDPE-based resin, designed for blow molding PE-applications with EVOH or PA. It offers advanced adhesion durability and good processability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 11.0 | MPa | |
| Break | 30.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 101 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEV-4325M70 | SHIN-A T&C | Epoxy | SHIN-A |
| Formolene® HP6000 | Formosa Plastics Corporation, U.S.A. | HDPE | Formolene® |
| Braskem PE LDF0823 | Braskem IDESA | LDPE | Braskem PE |
| Sylvin 5412-85 Natural | Sylvin Technologies Incorporated | TPE | Sylvin |
| TECHNYL® C 216 V45 BLACK 34N | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
