Order Products : sales@su-jiao.com
AKROMID® B3 GF 50 natural (3785)
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | AKRO-PLASTIC GmbH |
| Trademark: | AKROMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gi4GpU_AKROMID-B3-GF-50-natural-3785-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AKROMID® B3 GF 50 natural (3785) is a 50% glass fibre reinforced polyamide 6 with very high rigidity and strength and light inherent color Applications are mainly components in mechanical engineering and in the automotive industry |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.56 | g/cm³ | ISO 1183 |
| Spiral Flow | 57.0 | cm | Internal Method |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 0.90 | % | |
| Flow | 0.20 | % | |
| Water Absorption (Saturation, 23°C) | 4.5 to 5.1 | % | ISO 62 |
| Humidity Absorption - 62% RH (70°C) | 1.3 to 1.6 | % | ISO 1110 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Reinforcement Content | 50 | % | ISO 1172 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 16500 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 240 | MPa | ISO 527-2/5 |
| Tensile Strain (Break) | 2.6 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 14900 | MPa | ISO 178 |
| Flexural Stress 2 | 340 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 16 | kJ/m² | |
| 23°C | 20 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 90 | kJ/m² | |
| 23°C | 100 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 220 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 220 | °C | ISO 75-2/A |
| 8.0 MPa, Unannealed | 185 | °C | ISO 75-2/C |
| Melting Temperature 3 | 220 | °C | DIN EN 11357-1 |
| CLTE | ISO 11359-2 | ||
| Flow : 23 to 80°C | 1.1E-5 | cm/cm/°C | |
| Transverse : 23 to 80°C | 9.4E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+13 | ohms·cm | IEC 60093 |
| Comparative Tracking Index (Solution A) | 550 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate 4(1.00 mm) | < 100 | mm/min | FMVSS 302 |
| Flame Rating (1.60 mm) | HB | UL 94 | |
| Glow Wire Flammability Index (1.60 mm) | 650 | °C | IEC 60695-2-12 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | 10 K/min, DSC |
| 4 . | >1 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S ERV3808 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| Menzolit® CIC 1400 | Menzolit Ltd (UK) | Polyester, TS | Menzolit® |
| CYCOLAC™ INP338T resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
| Keliren® CM3600 | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
| PLUSTEK PB320G3 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
