Order Products : sales@su-jiao.com
SABIC® LLDPE MG500026
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gfTbSZ_SABIC-LLDPE-MG500026.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LLDPE MG50026 is a high flow linear density copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG50026 resin is in powder form. Application SABIC® LLDPE MG500026 typically used for injection moulding masterbatches where a high filler acceptance is required, combined with a good flow. Since the resin is supplied in free flowing powder form it can be used for masterbatch production where PE powders are used. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Compression Molded) | 2.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Compression Molded) | 354 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 13.0 | MPa | |
| Break, Compression Molded | 12.4 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 120 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 450 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 88.0 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® STAMAX 40YM241 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® STAMAX |
| TRISTAR® PC-10FR-(V) | Polymer Technology and Services, LLC | PC | TRISTAR® |
| AIE PPO 9010-G30 | Asia International Enterprise (Hong Kong) Limited | PPE+PS | AIE PPO |
| PMC® 780 Dry/Wet | Smooth-On, Inc | PUR, Unspecified | PMC® |
| Hifax EKC 187P 1750 | LyondellBasell Industries | PP Copolymer | Hifax |
