Order Products : sales@su-jiao.com
APEX® RM 8002
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | APEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gfQbB2_APEX-RM-8002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
APEX® RM 8002 is a Rigid Polyvinyl Chloride material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary attribute of APEX® RM 8002: Impact Resistant. Typical application of APEX® RM 8002: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2810 | MPa | ASTM D638 |
| Tensile Strength (Break) | 46.4 | MPa | ASTM D638 |
| Flexural Modulus | 2770 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 68.3 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 305 TFE 13 SI 2 | RTP Company | PC | RTP |
| Tenite™ Propionate 307A4000015 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| Geon™ Vinyl Rigid Molding M3700 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
| Orevac® 18341 | Arkema | LLDPE | Orevac® |
| Sylvin 8773-60D Grey 9509 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
