Order Products : sales@su-jiao.com
Generic Phenolic - Glass\Mineral
| Category: | Phenolic , Phenolic |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | geBGnu_Generic-Phenolic---Glass-Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Glass\Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.80 to 2.10 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | 0.096 to 0.20 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.020 to 0.30 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 10000 to 30000 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 50.0 to 100 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 0.34 to 0.46 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 8000 to 25100 | MPa | ISO 178 |
| Flexural Stress (23°C) | 103 to 181 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.7 to 5.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 5.0 to 14 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 189 to 224 | °C | ISO 75-2/A |
| CLTE - Flow | 1.7E-5 to 2.5E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Electric Strength (23°C) | 25 to 30 | kV/mm | IEC 60243-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Elastron® G G501.A35.N.PS | Elastron USA, Inc. | SEBS | Elastron® G |
| Geon™ Vinyl Rigid Extrusion LP300 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| K-vinyl KK-I-A88 | Technovinyl Polymers India Ltd. | PVC, Unspecified | K-vinyl |
| Lifoflex® UV 50 GB 1050 | ELASTO | SEBS | Lifoflex® |
| ALCOM® PWL 10/1 WT1130-09LB | ALBIS PLASTIC GmbH | PC | ALCOM® PWL |
