Order Products : sales@su-jiao.com
Braskem PE FP 33
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gdSMTl_Braskem-PE-FP-33.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The FP33 resin is a Linear Medium Density Polyethylene, copolymer of butene-1, produced by solution process, for film extrusion with good mechanical properties. Additive:
Application: Thin films and automatic packaging which require higher stiffness: textile products, toilet paper and others. Recommended film thickness: 0.025 to 0.100mm. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.932 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 38 µm | 30.0 | MPa | |
| TD : Break, 38 µm | 30.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 38 µm | 990 | % | |
| TD : Break, 38 µm | 1400 | % | |
| Flexural Modulus | ASTM D790 | ||
| 1% Secant, MD : 38 µm | 320 | MPa | |
| 1% Secant, TD : 38 µm | 380 | MPa | |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm | 20 | g | |
| TD : 38 µm | 180 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°, 38.0 µm) | 45 | ASTM D2457 | |
| Haze (38.0 µm) | 44 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 190 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SN602G30 | RJM International, Inc. | Nylon 66 | RJM |
| WACKER® FC 205 | Wacker Chemie AG | Silicone | WACKER® |
| Multilon® T-3615Q | TEIJIN LIMITED | PC+ABS | Multilon® |
| ELASTOSIL® R 770/75 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| INLUBE PA6GF30TF13SI2 | Infinity LTL Engineered Compounds | Nylon 6 | INLUBE |
