Order Products : sales@su-jiao.com

Nylene® 406

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gdG4ux_Nylene-406.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

General purpose, fast cycling molding resin

Crystallization initiators provide fast molding cycles through rapid melt set-up

Parts molded from 406 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon

Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle

General Information
Features	Fast Molding Cycle General Purpose Good Dimensional Stability
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.13	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.90	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	75.2	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	25	%	ASTM D638
Flexural Modulus (23°C)	2760	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	43	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	182	°C
1.8 MPa, Unannealed	71.1	°C
Peak Melting Temperature	216	°C	ASTM D3418

Flammability	Nominal Value		Test Method
Flame Rating (1.47 mm)	V-2		UL 94

Injection	Nominal Value	Unit
Processing (Melt) Temp	232 to 243	°C

Resin Grade	Manufacturer	Category	Trademark
WPP PP PPH2CF2-Black	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
Daicel PP PT6F1	Daicel Polymer Ltd.	PP, Unspecified	Daicel PP
Lucky Enpla LPC1008F	Lucky Enpla Co LTD	PC	Lucky Enpla
Sylvin 8392-55D Natural	Sylvin Technologies Incorporated	PVC, Rigid	Sylvin
TECHNYL® C 218L V30 GREY 3385	Solvay Engineering Plastics	Nylon 6	TECHNYL®