Order Products : sales@su-jiao.com
EPLAMID 6 CFR 50 NC
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | EPSAN Plastik SAN. ve TiC. A.S. |
| Trademark: | EPLAMID 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gcu7MB_EPLAMID-6-CFR-50-NC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyamide 66, reinforced with 50 % of carbon fiber, heat stabilized, lubricated for injection moulding. Eplamid 6 CFR 50 is used in all sectors of industry, offering a perfect balance of thermal and mechanical properties. This product is available in natural and in colours on request. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.38 - 1.41 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction : 3.00mm | 0.50 | % | ISO 294-4 |
| Flow direction : 3.00mm | 0.20 | % | ISO 294-4 |
| Moisture Content | 0.20 | % | ISO 15512 |
| Ash content- CARBON FIBER (550°C -10 min) | 50.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 23°C) | 85 - 90 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 10500 - 11000 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 160 - 190 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 2.0 - 3.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 9000 - 10500 | MPa | ISO 178 |
| Flexural Stress (23°C) | 210 - 280 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 11 - 16 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (23°C) | 11 - 16 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 200 - 230 | °C | ISO 3146 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Additional Information |
|---|
| TEST CONDITIONS: Laboratory conditions are 23 ±2°C and 45-55 % RH. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 260 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP QR6701K | SABIC Americas, Inc. | PP Random Copolymer | SABIC® PP |
| Sindustris ABS LRS768 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| ALFATER XL® A90I 4FC0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| HiFill® PA6/6 IM HS L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| SQUARE® LIM8620-70A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
