Order Products : sales@su-jiao.com
Boda BDT246-1EP
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Chenguang Fluoro & Silicone Elastomers Co., Ltd. |
| Trademark: | Boda |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gceGu6_Boda-BDT246-1EP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BDT246-1EP is a low viscosity curative incorporated fluoroelastomer terpolymer. This grade is well suited for application where good flowability, mold release and improved fluid resistance than standard terpolymers are required. BDT246-1EP can be compounded to meet the major fluoroelastomer specifications. BDT246-1EP can be used for extrusion molding of profiles and low permeability hoses. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.87 | g/cm³ | |
| Mooney Viscosity (ML 1+10, 121°C) | 28 | MU | |
| Fluorine Content | 69 | % | |
| Solubility | LMW Ketones and esters |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| MH 1(177°C) | 1.92 | N·m | |
| ML 2(177°C) | 0.120 | N·m | |
| t'90 3(177°C) | 2.0 | min | |
| ts2 4(177°C) | 51.0 | sec |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 5(Shore A) | 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 6(Yield) | 12.5 | MPa | ASTM D412 |
| Tensile Elongation 7(Break) | 290 | % | ASTM D412 |
| Compression Set (200°C, 70 hr) | 37 | % | ASTM D395B |
| Additional Information |
|---|
| Test Compound: Polymer: 100 MT Black (N990): 30 phr MgO: 3 phr Ca(OH)2: 6 phr Curing Condition: Press: 10 min at 170°C Oven: 24 hr at 230°C |
| Note Message | |
|---|---|
| 1 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 2 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 3 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 4 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 5 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| 6 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| 7 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 AR 10 TFE 10 | RTP Company | PC | RTP |
| WPP PP WPP 204 | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| Chemical Resources RPP 3500CW | Chemical Resources, Inc. | PP Random Copolymer | Chemical Resources |
| Ferro PP LPP35BC81NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| ISOTAL™ C9W | SABIC Innovative Plastics Europe | Acetal (POM) Copolymer | ISOTAL™ |
