Order Products : sales@su-jiao.com
KRATON® D1124 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gY1Bf5_KRATON-D1124-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1124 P is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below.
Kraton D1124 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 4.0 | g/10 min | |
| Antioxidant Additive | 0.080 to 0.30 | % | Internal Method |
| Ash Content - T, Talc | 0.2 to 0.4 | wt% | Internal Method |
| Polystyrene Content | 28 to 32 | % | Internal Method |
| Solution Viscosity - Toluene, 25%w (25°C) | 280 to 400 | mPa·s | Internal Method |
| Total Extractables | < 1.2 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 29.0 | ||
| Styrene/Rubber ratio | 30/70 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 54 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.96 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 14.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1100 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RX® 613 | Sumitomo Bakelite North America, Inc. | Phenolic | RX® |
| Terblend® N 3154 | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
| CGPC PVC SO-30X (100 phr Plasticizer F) | China General Plastics Corporation | PVC, Flexible | CGPC PVC |
| FHR Polypropylene 21N2A | Flint Hills Resources, LP | PP Homopolymer | FHR Polypropylene |
| ESTOPLAST EP 4030WW23 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
