Sarlink® TPE EE-1290 BLK 111 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink EE-1290 BLK 111 is a general purpose thermoplastic elastomer designed for automotive applications, including exterior extruded components. Sarlink EE-1290 BLK 111 is a high hardness, high density grade with good UV resistance and can also be injection molded.

General Information
Features	UV Stabilized High specific gravity High density Workability, good Good adhesion Good chemical resistance High hardness
Uses	Blow molding applications Washer Weather-resistant sealing strip Application in Automobile Field Car interior parts Automotive exterior parts Car exterior decoration General
RoHS Compliance	RoHS compliance
Appearance	Opacity
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.18	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.60	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 15 sec)	90		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1.86	MPa	ASTM D790

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	4.55	MPa	ASTM D412
Tensile Strength (Break)	12.4	MPa	ASTM D412
Tensile Elongation (Break)	550	%	ASTM D412
Tear Strength ¹	47.3	kN/m	ASTM D1004

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	199 - 210	°C
Middle Temperature	204 - 216	°C
Front Temperature	210 - 221	°C
Nozzle Temperature	216 - 227	°C
Processing (Melt) Temp	216 - 227	°C
Mold Temperature	35 - 66	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	193 - 204	°C
Cylinder Zone 2 Temp.	199 - 210	°C
Cylinder Zone 3 Temp.	204 - 216	°C
Cylinder Zone 4 Temp.	204 - 216	°C
Cylinder Zone 5 Temp.	210 - 221	°C
Die Temperature	216 - 227	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Note Message
1 .	C mould

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gVyyIV_SarlinkTPEEE1290BLK111.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SILPURAN® 2450 A/B	Wacker Chemie AG	Silicone	SILPURAN®
APEX® 69-8256-E	Teknor Apex Company	PVC, Flexible	APEX®
Hax™ HF 213	Fainplast Compounds S.r.l	Polyolefin, Unspecified	Hax™
LNP™ STAT-LOY™ SLWM2105 compound	SABIC Innovative Plastics Asia Pacific	PC+PBT	LNP™ STAT-LOY™
Hostacom TRC 411Y C11543	LyondellBasell Industries	PP Copolymer	Hostacom