Order Products : sales@su-jiao.com
TPUCO® TPUE-UE80
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Taiwan PU Corporation |
| Trademark: | TPUCO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gVMVKO_TPUCO-TPUE-UE80.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPUCO® TPUE-UE80 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific for extrusion. Primary attribute of TPUCO® TPUE-UE80: Wear Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 14.0 | mg |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience | 36 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 4.41 | MPa | |
| 300% Strain | 7.35 | MPa | |
| Tensile Strength (Break) | 22.6 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 900 | % | ASTM D412 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 165 | °C | |
| Cylinder Zone 5 Temp. | 170 | °C | |
| Adapter Temperature | 170 | °C | |
| Die Temperature | 190 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NILENE® E6 K20VA V0 | Taro Plast S.p.A. | PP Copolymer | NILENE® |
| Andur 7003 AP-M/Curene® 89-LC | Anderson Development Company | PUR-Ether/TDI | Andur |
| APTIV® 1103 | Victrex plc | PEEK | APTIV® |
| Polifil® PP GFPP-40 | The Plastics Group | PP Homopolymer | Polifil® PP |
| Sylvin 5150-80 Grey 9424 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
