Order Products : sales@su-jiao.com
Petro Rabigh PP AZ564G
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Rabigh Refining & Petrochemical Co. |
| Trademark: | Petro Rabigh PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gUndPl_Petro-Rabigh-PP-AZ564G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AZ564G is a block copolymer polypropylene intended for industrial application & thin wall applications. It has a high melt flow and formulated with nucleating agent. Injection molding parts made from this resin exhibit good impact, high stiffness and good heat stability. Applications
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 39 | g/10 min | ASTM D1238 |
| Molding Shrinkage | Internal Method | ||
| Flow | 1.4 | % | |
| Across Flow | 1.6 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 86 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 24.0 | MPa | |
| Break | 16.0 | MPa | |
| Flexural Modulus | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ASTM D256 | ||
| -20°C | 5.0 | kJ/m² | |
| 23°C | 9.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 118 | °C | ASTM D648 |
| Vicat Softening Temperature | 149 | °C | ASTM D1525 1 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Multilon® TN-7100F | TEIJIN LIMITED | PC+ABS | Multilon® |
| Advanced Composites ADX-5017 | Advanced Composites, Inc. | TPO | Advanced Composites |
| Geon™ BIO RC8000 | PolyOne Corporation | PVC, Flexible | Geon™ BIO |
| Perfactory® HTM140IV | EnvisionTEC, Inc. | Acrylic, Unspecified | Perfactory® |
| Kepital® F40-03 | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
