Order Products : sales@su-jiao.com
Kingfa PP-KF06
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Kingfa |
| Trademark: | Kingfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gUiBhF_Kingfa-PP-KF06.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP-T20 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 - 1.08 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 - 14 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.1 - 1.2 | % | Internal method |
| Ash Content 1(750°C) | 18 - 22 | % | ISO 3451 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Long Term Aging (150°C) | > 700.0 | hr | ISO 188 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 32.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 2 | 2400 | MPa | ISO 178 |
| Flexural Stress 3 | 45.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 3.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, unannealed, 4.00mm span) | 125 | °C | ISO 75-2/B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 190 - 230 | °C | |
| Front Temperature | 200 - 240 | °C | |
| Processing (Melt) Temp | 190 - 245 | °C | |
| Mold Temperature | 20.0 - 50.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 10.0 | MPa |
| Injection instructions |
|---|
| Processing Temp. Limit: 260°C |
| Note Message | |
|---|---|
| 1 . | 30 min |
| 2 . | 2.0 mm/min |
| 3 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SNOLEN® IM 31/52 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| BJB Epoxy TC-1604 A/B | BJB Enterprises, Inc. | Epoxy | BJB Epoxy |
| Kumho SAN SAN 335T | Korea Kumho Petrochemical Co., Ltd. | SAN | Kumho SAN |
| Petra® 140 | BASF Corporation | PET | Petra® |
| Infino NH-1022 | LOTTE ADVANCED MATERIALS CO., LTD. | PC+ABS | Infino |
