Order Products : sales@su-jiao.com
StarTUFF TF 40-LR-1
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | STAR Thermoplastic Alloys & Rubbers, Inc. |
| Trademark: | StarTUFF |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gTPwlp_StarTUFF-TF-40-LR-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
StarTUFF TF 40-LR-1 is an easy processing TPE designed for injection molding. Features -Soft Touch -Rubbery Feel -High Tear strength -High Tensile strength |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 39 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain, 23°C) | 1.14 | MPa | ASTM D412 |
| Tensile Strength (Yield, 23°C) | 6.65 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 700 | % | ASTM D412 |
| Tear Strength | 21.0 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (210°C, 11000 sec^-1) | 8.60 | Pa·s | ASTM D3835 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMATOP HDPE 003955P | Amco Polymers | HDPE | PRIMATOP |
| VALOX™ SHF4930 resin | SABIC Innovative Plastics Europe | PBT | VALOX™ |
| Artenius HOT | Artenius | PET | Artenius |
| INSULCAST® 136/INSULCURE 9 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| THERMOLAST® V TV7VAZ (Series: LTP/PA) | KRAIBURG TPE | TPE | THERMOLAST® V |
