Order Products : sales@su-jiao.com
Elastocon® 2840B
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gR86Q7_Elastocon2840B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 2840B is a black thermoplastic elastomer compound formulated for applications that require rubber-like properties and high resilience. Elastocon® 2840B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2840B is supplied as ready to use pellets in 50 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.30 | MPa | ASTM D412 |
| Tensile Strength | 7.60 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 370 | % | ASTM D412 |
| Tear Strength | 17.5 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 188 - 199 | °C | |
| Front Temperature | 193 - 204 | °C | |
| Nozzle Temperature | 199 - 204 | °C | |
| Processing (Melt) Temp | 199 - 204 | °C | |
| Mold Temperature | 38 - 49 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 - 1.03 | MPa |
| Injection instructions |
|---|
| Elastocon® 2840B thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 171 | °C | |
| Cylinder Zone 3 Temp. | 171 - 177 | °C | |
| Cylinder Zone 4 Temp. | 182 - 188 | °C | |
| Cylinder Zone 5 Temp. | 177 - 182 | °C | |
| Die Temperature | 160 - 171 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 75 to 125 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MALEX 01EFR002 - 4229 | AD majoris | PC | MALEX |
| Norprene A70F | Saint Gobain - Norton | TPE | Norprene |
| DOW™ VLDPE DFDA-1010 NT 7 | The Dow Chemical Company | VLDPE | DOW™ VLDPE |
| EPO-TEK® H72 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| ICORENE® N6504 | ICO Polymers EMEA, A Division of A. Schulman | PS (HIPS) | ICORENE® |
