Order Products : sales@su-jiao.com
Genestar™ GW2458HF
| Category: | Nylon 9T , Polyamide 9T |
| Manufacturer: | Kuraray Co., Ltd. |
| Trademark: | Genestar™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gPVXUu_Genestar-GW2458HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GW2458HF is suited for low warpage and high flow applications, making it well suited for card connectors. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.73 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (320°C/2.16 kg) | 84 | g/10 min | ASTM D1238 |
| Molding Shrinkage | |||
| Flow : 1.00 mm | 0.030 | % | |
| Across Flow : 1.00 mm | 0.40 | % | |
| Water Absorption 1(Equilibrium, 40°C, 95%RH) | 0.80 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 165 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.5 | % | ASTM D638 |
| Flexural Modulus | 15000 | MPa | ASTM D790 |
| Flexural Strength | 225 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 285 | °C | ASTM D648 |
| Glass Transition Temperature | 125 | °C | |
| Melting Temperature | 306 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 30 | kV/mm | ASTM D149 |
| Dielectric Constant (10.0 GHz) | 3.80 | ASTM D150 | |
| Dissipation Factor (10.0 GHz) | 0.010 | ASTM D150 | |
| Comparative Tracking Index (CTI) | PLC 0 | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Bar Flow Length 2(320°C, 500.0 µm) | 7.10 | cm | |
| Weld Elongation | 0.30 | % | ASTM D638 |
| Weld Strength | 35.0 | MPa | ASTM D638 |
| Note Message | |
|---|---|
| 1 . | 96 hrs |
| 2 . | 750kgf |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer FE-221U | Shin-Etsu Silicones of America | Fluoro Si | Shin-Etsu Elastomer |
| Vinnolit® E 67 FF | Vinnolit GmbH & Co. KG | PVC, Unspecified | Vinnolit® |
| Adell Polyamide AB-38 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Baydur® 660 IBS (35 pcf) | Covestro - PUR | PUR-MDI | Baydur® |
| Ducor® 2348 TC | Ducor Petrochemicals BV | PP Copolymer | Ducor® |
