Order Products : sales@su-jiao.com

SILVER® SA-1107

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Guangdong Silver Age Sci & Tech. Co., Ltd
Trademark:	SILVER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gPGzXW_SILVER-SA-1107.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SlLVER® SA-1000 elastomer is a kind of thermoplastic elastomer comprising of unsaturated styrene—butadiene rubber for indoor room temperature applications, such as toys, clear product, bearing seals and sole, which is similar to thermoset rubber in physical properties. And SA—1000 elastomer can be injected or extruded on thermoplastic equipment. SA—1000 Elastomer (Unsaturated Styrene—butadiene Rubber) Characteristics: similar to thermoset rubber in physical properties Applications: toys, seal ring, cushion blocking, insole, sole, fender board, cap of pen, truckle, tire and so on

Message

SlLVER® SA-1000 elastomer is a kind of thermoplastic elastomer comprising of unsaturated styrene—butadiene rubber for indoor room temperature applications, such as toys, clear product, bearing seals and sole, which is similar to thermoset rubber in physical properties. And SA—1000 elastomer can be injected or extruded on thermoplastic equipment.

SA—1000 Elastomer (Unsaturated Styrene—butadiene Rubber)

Characteristics:

similar to thermoset rubber in physical properties

Applications:

toys, seal ring, cushion blocking, insole, sole, fender board, cap of pen, truckle, tire and so on

General Information
Features	Copolymer
Uses	Caps Footwear Seals Tires Toys
Appearance	Clear/Transparent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.928	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (180°C/2.16 kg)	15	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 3 sec)	85		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹	7.00	MPa	ASTM D638
Tensile Elongation ²(Break)	> 450	%	ASTM D638

Injection	Nominal Value	Unit
Processing (Melt) Temp	160 to 190	°C

Extrusion	Nominal Value	Unit
Melt Temperature	160 to 190	°C

Note Message
1 .	500 mm/min
2 .	500 mm/min

Resin Grade	Manufacturer	Category	Trademark
MAXAMID™ PA66MG40-NC010	Pier One Polymers, Inc.	Nylon 66	MAXAMID™
Sylvin 8409-80 Natural	Sylvin Technologies Incorporated	PVC+PUR	Sylvin
Generic Silicone - Aluminum	Generic	Silicone	Generic
Sylvin 8036-60 Clear Yellow 4172	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 29168-95 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin